Qingdao Terada Hardware Co.,Ltd
Stainless Steel Wire Rope Thimble, also known as Heart-shaped thimble, is a type of crane spreader with a rope groove for the end of the rope around the tie, to prevent excessive bending and wear of the rope, and can connect the heart of other components Metal ring. Stainless Steel Wire Rope Thimble in the field of heavy lifting is widely used, the following is the quality requirements and standards for wire rope rings
1,Stainless Steel Wire Rope Thimbleshould be smooth, without any damage to the rope crack, flaw, sharp edge and surface roughness inequalities defects. The tip of the Wire rope thimble should fit freely and truncate the tip to half the depth of the groove.
2, Stainless Steel Wire Rope Thimblesurface should be surface treatment, and the surface should be smooth, no bubbles, cracks and other defects.
3, Stainless Steel Wire Rope Thimble the choice of stainless steel 304 stainless steel or stainless steel 316 high-quality stainless steel.
4, Stainless Steel Wire Rope Thimble safety load should not be less than the minimum breaking wire rope 32%.
5, the use of wire rope thimble selection should be consistent with the specifications of wire rope (Schedule 5), the pin diameter shall not be less than twice the diameter of wire rope.(FROM TERADA HARDEARE)
Copyright © Qingdao Terada Hardware Co.,Ltd All Rights Reserved.