logo

Product

Contact Us

Fork Terminal Instructions

Fork Terminal Instructions

Attaches Fork Terminal Instructions stainless steel wire to fixed anchor points such as an Eye Saddle, Saddle Plate, Eye Bolt or Screw Eye. Ideal for straight sections, or where an angle is required such as fitting wire balustrade to stairs. The Fork Terminal Instructions swageless lterminal balustrading kit can be used on timber. The wires can be easily replaced as it does not require a swage to tighten the wires onto the balustrade. Traditionally, when a stainless steel wire in a balustrade system becomes saggy, the fixing point must be replaced. Over a period of time, maintaining such balustrade system can be troublesome.

Product Details


Attaches Fork Terminal Instructions stainless steel wire to fixed anchor points such as an Eye Saddle, Saddle Plate, Eye Bolt or Screw Eye. Ideal for straight sections, or where an angle is required such as fitting wire balustrade to stairs.


The Fork Terminal Instructions swageless lterminal balustrading kit can be used on timber. The wires can be easily replaced as it does not require a swage to tighten the wires onto the balustrade.

Traditionally, when a stainless steel wire in a balustrade system becomes saggy, the fixing point must be replaced. Over a period of time, maintaining such balustrade system can be troublesome.

Our uniquely designed Fork Terminal Instructions swageless wire balustrade system offers a cost effective solution. Simply unscrew the fixing point, straighten the wire and securely tighten the fixing point.

Always check with your local council for building regulations before attempting to install the balustrading kit.






swageless terminals.jpg

swage terminals.jpg


QQ图片20180518181432.png


QQ图片20180518174655.png



HOW ASSEMBLE INSTRUCTIONS SWAGELESS TERMINALS


65.jpg


1. First slide the jaw housing in place on the cable.

2. Next, slide the jaws onto the cable leaving some space between the jaw sections.

3. Place the brass pressure ring on the end of the cable. Make sure that the distance from the

    pressure ring to the end of the cable is 5 mm.

4. Slide the jaw housing over the jaws.

5. The Fork Terminal Instructions terminal can now be assembled. Screw the head firmly to the jaw housing with a spanner.

    Then tighten the lock nut firmly with a spanner.

6. When assembling the Swageless Terminal a non-acidic sealing compound must be used in the housing,

    sikaflex 221, for example.

    Disassemble the terminal and fill the jaw housing and the cavity with sealing compound, then assemble

    the terminal. Repeat this until the sealing compound emerges from the hole through which the cable is inserted.

    Clean the terminal. Do NOT reuse the jaws. Make sure that the dimensions of the terminal and cable match.

Maintenance

Check the terminal regulary for damage in connection with longer exposure to concentrated saline solutions or

polluted surroundings. Check the seal, if it is broken remove all sealing compound. Then rinse the terminal with

fresh water and treat it with WD40. Reseal the terminal with non-acidic sealing compound.

Note

After the first dynamic load the terminal MUST be tightened again. The Fork Terminal Instructions terminal was developed for use with following types of cable: 1×19, 7×19 and 7×7. The terminal can also be used with Dyform (compacted strand)

When assembling Fork Terminal Instructions swageless terminals the the breaking strength of the cable used will be reduced by 0-15 %.


Hot Tags: fork terminal instructions, manufacturers, suppliers, for sale
Related Products

Inquiry

Product Categories
Stainless Turnbuckles
Stainless Steel Cable Railing
Stainless Steel Lifting Eye Bolts
Stainless Hook
Latest News
XLPE Cable
Application Of Steel Wire
Wire Rope Stud
A Wire Rope
Contact information

XIFU PACK, CHENGYANG DISTRICT, QINGDAO,SHANDONG PROVINCE,CHINA.

Tel:+86-532-85865857

Info@qdterada.com

Copyright © Qingdao Terada Hardware Co.,Ltd All Rights Reserved.