Qingdao Terada Hardware Co.,Ltd
316 stainless steel metal 1/4 small Jaw and Jaw US Type forged turnbuckle hardware,which is 316 metal turnbuckle and have very small turnbuckle,small turnbuckle hardware is difficult to produce,but our company overcome the difficulties for 1/4 turnbuckle.Let our jaw and jaw turnbuckle a class of...
Stainless turnbuckle The use of screw retractable, can adjust the rope tightness. Components can be bundled during component transport and loose during installation and calibration. The utility model is composed of a regulating rod, a nut and a pull rod which are provided with a left-hand and a right-hand thread. The adjusting rod is also fixed with a theft-proof and anti-loosing device which is integrated with a cover plate, a fixing plate and a guard plate. Use must use special supporting sleeve to unscrew the anti-theft locking bolt, the security effect is good, safe and reliable. After the anti-theft protection device is disassembled, it is not required to be taken down, and the ring guide plate on the anti-theft device is used to slide along the pull rod so as to be adjusted and operated by moving a distance so that it is easy to use. Its structure is simple, easy processing, low cost, practicality. Especially suitable for power lines, especially for high-voltage tower rod positioning device. stainless steel turnbuckle is a cast steel, the design calculation, only the corresponding rod can be calculated, but turnbuckle specifications should be higher than the rod, the following is commonly used in steel design rod and the corresponding open body turnbuckle specifications:
Pull rod turnbuckle
If using other specifications of the rod, the turnbuckle can be made for. A variety of ordinary or high-strength turnbuckle, turnbuckle eye bolt, open body turnbuckle, closed body turnbuckle, made of: 45 #, 304 stainless steel 316 turnbuckle eye bolt, turnbuckle, open body turnbuckle, closed body turnbuckle and so on.
316 stainless steel metal 1/4 small Jaw and Jaw US Type forged turnbuckle hardware,which is 316 metal turnbuckle and have very small turnbuckle,small turnbuckle hardware is difficult to produce,but our company overcome the difficulties for 1/4 turnbuckle.Let our jaw and jaw turnbuckle a class of US Type forged turnbuckle.
When our mass products is ok,we will delivery mass products to port and shipping by vessel,about one month reach the clients port,clients can customs clearance and unload cargo,then delivery to their warehouse.For example,when the 1/4 turnbuckle finished,it will be ship to custom,when clients got this metal turnbuckle,this order is end as follow picture.
CNC lathes, hydraulic machines, drilling and milling machines, presses, air hammer, resistance furnace, reverberatory furnace, automatic spline shaft milling machines, high-precision cylindrical grinding machines, drilling long, length measurement, hardness, and other advanced production and testing equipment.
Copyright © Qingdao Terada Hardware Co.,Ltd All Rights Reserved.